VirtualBox环境下 Juniper junos SRX防火墙模拟器 完全攻略版

虚拟人生

Juniper junos SRX防火墙模拟器 完全攻略版  

如果是专成看使用攻略那下面这个链接就可以忽略了

如果是先看到了攻略，需要下载镜像的话请移步至：

Juniper junos SRX防火墙模拟器 附详细教程及软件


其实这个是昨天落下的活，昨天发布了模拟器，但是时间原因没来及写教程

今天就给大家做一个简单的教程，VirtualBox的教程昨天已经写完了，在上面的链接中有引贴


这里还是需要用到两个个软件：SecureCRT 相信非常多的朋友都曾经使用过SecureCRT

SecureCRT and SecureFX v7.0.3 7.1.3 7.2.2 7.2.4 x86 x64完全注册正式版

另外一个：Named Pipe TCP Proxy  这个知道的朋友就肯定非常少了，本身就是小众软件

Named Pipe TCP Proxy 终端控制台与模拟器连接

我们开始教程，打开虚拟机----管理---导入虚拟电脑---选择

默认设置下一步，同意协议

Junos-vsrx-12.1X44-D10.4-domestic.OVA文件   镜像下载可以通过上文给出链接进行下载！

启动好的画面

右键虚拟机点设置，或单击虚拟机点击主导航设置，单击串口   \\.\pipe\SRX

此步骤可能需要在关闭虚拟机的情况下进行设置，显存需要大于等于6M

打开Named Pipe TCP Proxy 配置端口  在空白处右击 选择ADD  按照下图进行配置  

端口在1023-65535之间均可  完成单击ADD

打开CRT软件，链接虚拟机

kapa9876

习CCNA,CCNP,CCIE技术就来www.santon

longccl

CCNA,CCNP,CCIE技术就来www.santon

dollarmartin

** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1 files, 1 used, 102782 free (2 frags, 25695 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
Verified junos-vsrx-12.1X44-D10.4-domestic signed by PackageProduction_12_1_0
WATCHDOG_TIMER : Loss of soft watchdog
panic: Loss of soft watchdog
cpuid = 0
db_log_stack_trace_cmd(c0d02ea0,0,eeb57b58,eeb57b44,c05e5691) at db_log_stack_trace_cmd+0x36
panic(eeb57b58,eeb57b58,0,1,6) at panic+0x2dc
statclock(eeb57c90,c4897630,4,eeb57cd0,c0a9479f) at statclock+0x32d
lapic_handle_timer(eeb57c90) at lapic_handle_timer+0x9d
Xtimerint() at Xtimerint+0x2f
--- interrupt, eip = 0xc0a9c7d0, esp = 0xeeb57cd0, ebp = 0xeeb57cd0 ---
cpu_idle_default(eeb57d00,c05a3fd2,1,0,0) at cpu_idle_default+0x5
cpu_idle(1,0,0,c4897630,c05a3f23) at cpu_idle+0x29
idle_proc(0,eeb57d38,0,0,0) at idle_proc+0xaf
fork_exit(c05a3f23,0,eeb57d38) at fork_exit+0x85
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xeeb57d70, ebp = 0 ---
###Entering boot mastership relinquish phase
KDB: enter: panic
[thread pid 12 tid 100004 ]
Stopped at      kdb_enter+0x162:        movl    $0xc0c77125,0(%esp)
db> start shell
No such command
db> ?????? F:\VMtest\SRX???\junos-vsrx-12.1X47-D2-domestic.ova??.
Bad character
?
db>
db>

dollarmartin

我的SRX虚拟怎么进入db模式？为何没有启动完毕？请大拿指点～～非常感谢

dollarmartin

坐等高手指导，为啥按照步骤操作而没法进入用户模式？？？？？？？？？？？？？？？？？？？？？？

tgq5862

每天来学习，跟三通一起成长

godder211

** /dev/ad0s1e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1 files, 1 used, 102782 free (2 frags, 25695 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
Verified junos-vsrx-12.1X44-D10.4-domestic signed by PackageProduction_12_1_0
WATCHDOG_TIMER : Loss of soft watchdog
panic: Loss of soft watchdog
cpuid = 0
db_log_stack_trace_cmd(c0d02ea0,0,e0291b58,e0291b44,c05e5691) at db_log_stack_trace_cmd+0x36
panic(e0291b58,e0291b58,0,1,6) at panic+0x2dc
statclock(e0291c90,c392e630,4,e0291cd0,c0a9479f) at statclock+0x32d
lapic_handle_timer(e0291c90) at lapic_handle_timer+0x9d
Xtimerint() at Xtimerint+0x2f
--- interrupt, eip = 0xc0a9c7d0, esp = 0xe0291cd0, ebp = 0xe0291cd0 ---
cpu_idle_default(e0291d00,c05a3fd2,1,0,0) at cpu_idle_default+0x5
cpu_idle(1,0,0,c392e630,c05a3f23) at cpu_idle+0x29
idle_proc(0,e0291d38,0,0,0) at idle_proc+0xaf
fork_exit(c05a3f23,0,e0291d38) at fork_exit+0x85
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xe0291d70, ebp = 0 ---
###Entering boot mastership relinquish phase
KDB: enter: panic
[thread pid 12 tid 100004 ]
Stopped at      kdb_enter+0x162:        movl    $0xc0c77125,0(%esp)
db>

yuejina

看看。。。。。。。。。。。。。。。

wuxiaowuwu

谢谢了额！