213页 HUAWEI SoftCo IP 语音综合交换机 V100R001 配置指南

失之东隅 · 发表于 2014-2-13 00:29:46

HUAWEI SoftCo IP 语音综合交换机 V100R001 配置指南

文档节选：前言....................................................................................................................................................1
1 数据配置概述...............................................................................................................................1-1
1.1 总体流程........................................................................................................................................................1-2
1.2 从这里开始....................................................................................................................................................1-3
1.3 注意事项........................................................................................................................................................1-3
2 配置系统基本数据........................................................................................................................2-1
2.1 背景知识........................................................................................................................................................2-2
2.2 配置概述........................................................................................................................................................2-2
2.3 配置SoftCo 设备的IP 地址..........................................................................................................................2-3
2.4 配置网关IP 地址..........................................................................................................................................2-4
2.5 配置TFTP 服务器的IP 地址........................................................................................................................2-4
2.6 配置系统时区................................................................................................................................................2-5
2.7 配置系统日期和时间....................................................................................................................................2-5
2.8 增加媒体资源板............................................................................................................................................2-6
2.9 配置实例........................................................................................................................................................2-6
3 配置媒体网关数据........................................................................................................................3-1
3.1 背景知识........................................................................................................................................................3-2
3.1.1 媒体网关的类型...................................................................................................................................3-2
3.1.2 媒体流的编解码方式............................................................................................................................3-2
3.1.3 媒体网关的注册方式............................................................................................................................3-3
3.2 配置概述........................................................................................................................................................3-4
3.3 增加MGCP/H.248 媒体网关.........................................................................................................................3-5
3.4 增加SIP 设备................................................................................................................................................3-6
3.4.1 增加一个SIP 设备...............................................................................................................................3-7
3.4.2 批量增加SIP 设备...............................................................................................................................3-8
3.5 配置SIP 协议的参数....................................................................................................................................3-9
3.6 配置实例......................................................................................................................................................3-10
4 配置用户数据...............................................................................................................................4-1
4.1 背景知识........................................................................................................................................................4-2
4.2 配置SoftCo5816 的POTS 用户数据............................................................................................................4-2
4.2.1 配置概述...............................................................................................................................................4-3
4.2.2 增加SoftCo5816 下的POTS 用户.......................................................................................................4-4
4.2.3 增加用户盒...........................................................................................................................................4-5
4.2.4 增加用户盒下的POTS 用户................................................................................................................4-5
4.3 配置SoftCo9500 的POTS 用户数据............................................................................................................4-6
4.3.1 配置概述...............................................................................................................................................4-6
4.3.2 增加用户盒...........................................................................................................................................4-7
4.3.3 增加用户盒下的POTS 用户................................................................................................................4-8
4.4 配置SIP 用户数据........................................................................................................................................4-9
4.4.1 配置概述...............................................................................................................................................4-9
4.4.2 增加SIP 用户.....................................................................................................................................4-10
4.5 配置MGCP/H.248 用户数据.......................................................................................................................4-11
4.5.1 配置概述.............................................................................................................................................4-11
4.5.2 增加MGCP/H.248 用户......................................................................................................................4-12
4.6 配置其他数据..............................................................................................................................................4-13
4.6.1 全局改号.............................................................................................................................................4-13
4.6.2 修改用户属性.....................................................................................................................................4-14
4.7 配置实例......................................................................................................................................................4-17
5 配置路由与号码分析数据............................................................................................................5-1
5.1 背景知识........................................................................................................................................................5-2
5.2 配置基本路由与号码分析数据.....................................................................................................................5-5
5.2.1 配置概述...............................................................................................................................................5-6
5.2.2 增加局向选择码...................................................................................................................................5-8
5.2.3 增加路由失败处理策略........................................................................................................................5-9
5.2.4 增加每日时间段.................................................................................................................................5-10
5.2.5 增加每周时间段.................................................................................................................................5-10
5.2.6 增加每月时间段.................................................................................................................................5-11
5.2.7 增加局向.............................................................................................................................................5-12
5.2.8 增加号码映射.....................................................................................................................................5-13
5.2.9 增加号码变换.....................................................................................................................................5-13
5.2.10 增加字冠...........................................................................................................................................5-15
5.2.11 增加DigitMap..................................................................................................................................5-18
5.3 配置呼叫源数据..........................................................................................................................................5-18
5.3.1 配置概述.............................................................................................................................................5-19
5.3.2 增加呼叫源.........................................................................................................................................5-21
5.3.3 将呼叫源与局向绑定..........................................................................................................................5-21
5.4 配置实例......................................................................................................................................................5-22
5.4.1 局向与字冠配置实例..........................................................................................................................5-22
5.4.2 号码映射配置实例..............................................................................................................................5-23
5.4.3 呼叫源配置实例.................................................................................................................................5-24
6 配置中继数据...............................................................................................................................6-1
6.1 背景知识........................................................................................................................................................6-2
6.1.1 SIP 中继................................................................................................................................................6-2
6.1.2 AT0 中继...............................................................................................................................................6-2
6.1.3 PRA 中继..............................................................................................................................................6-2
6.1.4 R2 中继.................................................................................................................................................6-2
6.1.5 No.7 中继..............................................................................................................................................6-2
6.2 配置SIP 中继数据........................................................................................................................................6-4
6.2.1 配置概述...............................................................................................................................................6-4
6.2.2 增加对局设备.......................................................................................................................................6-5
6.2.3 配置SIP 中继.......................................................................................................................................6-6
6.2.4 修改中继承载.......................................................................................................................................6-7
6.2.5 配置实例...............................................................................................................................................6-8
6.3 配置AT0 中继数据.......................................................................................................................................6-8
6.3.1 配置概述...............................................................................................................................................6-9
6.3.2 增加SoftCo9500 的单板.....................................................................................................................6-10
6.3.3 增加SoftCo5816 的单板.....................................................................................................................6-11
6.3.4 配置AT0 中继....................................................................................................................................6-13
6.3.5 配置实例.............................................................................................................................................6-13
6.4 配置PRA 中继数据....................................................................................................................................6-13
6.4.1 配置概述.............................................................................................................................................6-14
6.4.2 配置时钟源.........................................................................................................................................6-15
6.4.3 增加PRA 链路...................................................................................................................................6-16
6.4.4 配置PRA 中继...................................................................................................................................6-17
6.4.5 配置实例.............................................................................................................................................6-18
6.5 配置R2 中继数据.......................................................................................................................................6-18
6.5.1 配置概述.............................................................................................................................................6-18
6.5.2 增加R2 信令配置...............................................................................................................................6-20
6.5.3 配置R2 中继......................................................................................................................................6-21
6.5.4 配置实例.............................................................................................................................................6-23
6.6 配置No.7 中继数据....................................................................................................................................6-23
6.6.1 配置概述.............................................................................................................................................6-23
6.6.2 增加本局信令点编码..........................................................................................................................6-25
6.6.3 增加目的信令点编码..........................................................................................................................6-26
6.6.4 增加MTP 链路集...............................................................................................................................6-27
6.6.5 增加MTP 路由...................................................................................................................................6-28
6.6.6 增加MTP 链路...................................................................................................................................6-29
6.6.7 配置No.7 中继...................................................................................................................................6-30
6.6.8 配置ISUP 海外信令适配...................................................................................................................6-32
6.6.9 配置实例.............................................................................................................................................6-33
7 配置话务台数据............................................................................................................................7-1
7.1 背景知识........................................................................................................................................................7-2
7.2 配置概述........................................................................................................................................................7-2
7.3 配置话务台服务器的IP 地址.......................................................................................................................7-4
7.4 增加话务台组................................................................................................................................................7-4
7.5 将话务台加入话务台组................................................................................................................................7-5
7.6 配置实例........................................................................................................................................................7-6
8 配置计费数据...............................................................................................................................8-1
8.1 背景知识........................................................................................................................................................8-2
8.2 配置概述........................................................................................................................................................8-2
8.3 配置话单台服务器的IP 地址....................................................................................................................... 8-2
8.4 设置话单生成开关........................................................................................................................................8-3
8.5 设置AT0 话单生成开关...............................................................................................................................8-3
8.6 启动SoftCo 作为SNTP 服务器的功能........................................................................................................8-4
8.7 配置实例........................................................................................................................................................8-4
9 配置统一消息业务数据................................................................................................................9-1
9.1 背景知识........................................................................................................................................................9-2
9.2 配置UMS 基本数据.....................................................................................................................................9-3
9.2.1 配置概述...............................................................................................................................................9-3
9.2.2 增加UMS.............................................................................................................................................9-5
9.2.3 增加留言灯字冠...................................................................................................................................9-6
9.3 配置语音留言业务数据................................................................................................................................9-6
9.3.1 配置概述...............................................................................................................................................9-6
9.3.2 增加语音留言业务权限........................................................................................................................9-7
9.4 配置传真留言业务数据................................................................................................................................9-7
9.4.1 配置概述...............................................................................................................................................9-8
9.4.2 增加传真字冠.......................................................................................................................................9-9
9.4.3 增加传真号码.......................................................................................................................................9-9
9.4.4 增加传真留言业务权限........................................................................................................................9-9
9.5 配置实例......................................................................................................................................................9-10
10 配置视频会议业务数据............................................................................................................10-1
10.1 背景知识....................................................................................................................................................10-2
10.2 配置与视讯业务服务器的对接数据.........................................................................................................10-2
10.2.1 配置概述...........................................................................................................................................10-3
10.2.2 配置GKM 的信息.............................................................................................................................10-3
10.2.3 启动GKM 功能................................................................................................................................10-4
10.2.4 配置SoftCo 作为GK 的信息...........................................................................................................10-4
10.2.5 启动SoftCo 的GK 功能...................................................................................................................10-5
10.3 配置RADIUS 认证计费数据....................................................................................................................10-5
10.3.1 配置概述...........................................................................................................................................10-6
10.3.2 增加SoftCo 作为RADIUS 客户端的信息......................................................................................10-7
10.3.3 增加与RADIUS 服务器的对接信息...............................................................................................10-7
10.3.4 设置RADIUS 认证计费开关...........................................................................................................10-9
10.3.5 配置RADIUS 计费周期...................................................................................................................10-9
10.3.6 配置RADIUS 重发信息...................................................................................................................10-9
10.3.7 设置RADIUS 转移计费开关.........................................................................................................10-10
10.3.8 设置RADIUS 转移登记认证开关.................................................................................................10-10
10.4 配置实例..................................................................................................................................................10-11
11 配置限呼数据............................................................................................................................11-1
11.1 背景知识....................................................................................................................................................11-2
11.1.1 入中继限呼.......................................................................................................................................11-2
11.1.2 黑白名单...........................................................................................................................................11-2
11.1.3 其他限呼方式...................................................................................................................................11-3
11.2 配置入中继限呼数据................................................................................................................................11-4
11.2.1 配置概述...........................................................................................................................................11-4
11.2.2 配置中继的呼出权限........................................................................................................................11-5
11.2.3 增加主叫字冠...................................................................................................................................11-6
11.3 配置黑白名单数据....................................................................................................................................11-6
11.3.1 配置概述...........................................................................................................................................11-7
11.3.2 增加黑白名单用户............................................................................................................................11-7
11.4 配置话单池满的限呼数据.........................................................................................................................11-8
11.4.1 配置概述...........................................................................................................................................11-8
11.4.2 配置话单池满的主叫限呼................................................................................................................11-9
11.4.3 配置话单池满的被叫限呼..............................................................................................................11-10
11.5 配置CPU 过载限呼数据.........................................................................................................................11-10
11.5.1 配置概述.........................................................................................................................................11-11
11.5.2 配置CPU 过载阈值........................................................................................................................11-11
11.5.3 开启CPU 过载限呼功能................................................................................................................11-12
11.6 配置VoIP 域限呼数据............................................................................................................................11-12
11.6.1 配置概述.........................................................................................................................................11-12
11.6.2 增加VoIP 域..................................................................................................................................11-13
11.7 配置实例..................................................................................................................................................11-14
12 配置卡号业务数据....................................................................................................................12-1
12.1 背景知识....................................................................................................................................................12-2
12.2 配置概述....................................................................................................................................................12-2
12.3 增加计费类型............................................................................................................................................12-4
12.4 配置实例....................................................................................................................................................12-4
13 组网配置实例............................................................................................................................13-1
13.1 配置局内组网的数据................................................................................................................................13-2
13.1.1 配置概述...........................................................................................................................................13-2
13.1.2 配置脚本（SoftCo 侧）....................................................................................................................13-3
13.1.3 配置脚本（IAD 侧）........................................................................................................................13-4
13.1.4 配置脚本（UA5000 侧）.................................................................................................................13-4
13.2 配置与其他SoftCo 对接的数据（采用SIP 中继）................................................................................13-5
13.2.1 配置概述...........................................................................................................................................13-6
13.2.2 配置脚本（SoftCo5816 侧）............................................................................................................13-7
13.2.3 配置脚本（SoftCo9500 侧）............................................................................................................13-7
13.3 配置与PSTN 对接的数据（采用AT0 中继）........................................................................................13-7
13.3.1 配置概述...........................................................................................................................................13-7
13.3.2 配置脚本...........................................................................................................................................13-8
13.4 配置与PSTN 对接的数据（采用PRA 中继）.......................................................................................13-9
13.4.1 配置概述...........................................................................................................................................13-9
13.4.2 配置脚本.........................................................................................................................................13-10
13.5 配置与PSTN 对接的数据（采用No.7 中继）.....................................................................................13-11
13.5.1 配置概述.........................................................................................................................................13-11
13.5.2 配置脚本.........................................................................................................................................13-13
13.6 配置与传统PBX 对接的数据（采用R2 中继）..................................................................................13-13
13.6.1 配置概述.........................................................................................................................................13-13
13.6.2 配置脚本.........................................................................................................................................13-14
14 业务配置实例............................................................................................................................14-1
14.1 配置话务台业务数据................................................................................................................................14-2
14.1.1 配置概述...........................................................................................................................................14-2
14.1.2 配置脚本...........................................................................................................................................14-3
14.2 配置计费数据............................................................................................................................................14-3
14.2.1 配置概述...........................................................................................................................................14-3
14.2.2 配置脚本...........................................................................................................................................14-4
14.3 配置统一消息业务数据.............................................................................................................................14-4
14.3.1 配置概述...........................................................................................................................................14-4
14.3.2 配置脚本...........................................................................................................................................14-5
14.4 配置视频会议业务数据.............................................................................................................................14-6
14.4.1 配置概述...........................................................................................................................................14-6
14.4.2 配置脚本...........................................................................................................................................14-7
14.5 配置限呼数据............................................................................................................................................14-7
14.5.1 配置概述...........................................................................................................................................14-8
14.5.2 配置脚本...........................................................................................................................................14-8
14.6 配置卡号业务数据....................................................................................................................................14-9
14.6.1 配置概述...........................................................................................................................................14-9
14.6.2 配置脚本...........................................................................................................................................14-9
A 定制VU 业务............................................................................................................................. A-1
A.1 背景知识......................................................................................................................................................A-2
A.2 制作语音文件..............................................................................................................................................A-3
A.2.1 通过话机录音.....................................................................................................................................A-3
A.2.2 通过录音软件录音..............................................................................................................................A-3
A.3 加载语音文件..............................................................................................................................................A-5
A.4 编辑VU 脚本文件......................................................................................................................................A-5
A.4.1 VU 脚本命令......................................................................................................................................A-6
A.4.2 编辑自动总机脚本..............................................................................................................................A-9
A.4.3 编辑电话会议脚本............................................................................................................................A-11
A.5 生成VU 命令行文件................................................................................................................................A-12
A.6 执行VU 命令行........................................................................................................................................A-13
A.7 配置VU 接入码........................................................................................................................................A-13
A.7.1 配置自动总机VU 接入码................................................................................................................A-13
A.7.2 配置电话会议VU 接入码................................................................................................................A-13
A.7.3 配置自定义VU 接入码....................................................................................................................A-14
B 缩略语.........................................................................................................................................B-1

购买主题本主题需向作者支付 4 金币 才能浏览

Dinorganic · 发表于 2014-3-16 23:11:53

每天来学习，跟三通一起成长！

认真的雪 · 发表于 2014-3-19 09:51:52

爱技术,爱实验,尽在三通IT学院!

加加油 · 发表于 2014-3-31 21:16:26

虚拟化,据库,程学习就在www.santongit.com！

wjc3129 · 发表于 2016-8-30 13:49:51

RE: HUAWEI SoftCo IP 语音综合交换机 V100R001 配置指南 [修改]

sjjsvr · 发表于 2016-8-31 08:05:06

爱技术,爱实验,尽在三通IT学院!

wang58246 · 发表于 2016-8-31 12:40:54

好好学习，天天向上！

sjjsvr · 发表于 2016-9-3 17:37:51

速度抢沙发，感谢卤煮分享！

NAXLCQ · 发表于 2016-9-10 08:15:05

爱技术,爱实验,尽在三通IT学院!爱技术,爱实验,尽在三通IT学院!

xfan · 发表于 2016-9-10 17:07:54

衷心感谢分享优质资源！

三通IT学院

213页 HUAWEI SoftCo IP 语音综合交换机 V100R001 配置指南

水神

我爱三通

售前咨询

售后服务