2014-8-16 22:02
VirtualBox环境下 Juniper junos SRX防火墙模拟器 完全攻略版
| Juniper junos SRX防火墙模拟器 完全攻略版 如果是专成看使用攻略那下面这个链接就可以忽略了 如果是先看到了攻略，需要下载镜像的话请移步至： Juniper junos SRX防火墙模拟器 附详细教程及软件 其实这个是昨天落下的活，昨天发布了模拟器，但是时间原因没来及写教程 今天就给大家做一个简单的教程，VirtualBox的教程昨天已经写完了，在上面的链接中有引贴 这里还是需要用到两个个软件：SecureCRT 相信非常多的朋友都曾经使用过SecureCRT SecureCRT and SecureFX v7.0.3 7.1.3 7.2.2 7.2.4 x86 x64完全注册正式版 另外一个：Named Pipe TCP Proxy 这个知道的朋友就肯定非常少了，本身就是小众软件 我们开始教程，打开虚拟机----管理---导入虚拟电脑---选择 默认设置下一步，同意协议 Junos-vsrx-12.1X44-D10.4-domestic.OVA文件 镜像下载可以通过上文给出链接进行下载！  启动好的画面  右键虚拟机点设置，或单击虚拟机点击主导航设置，单击串口 \\.\pipe\SRX 此步骤可能需要在关闭虚拟机的情况下进行设置，显存需要大于等于6M   打开Named Pipe TCP Proxy 配置端口 在空白处右击 选择ADD 按照下图进行配置 端口在1023-65535之间均可 完成单击ADD   打开CRT软件，链接虚拟机   |
发表评论
最新评论
- 引用 dollarmartin
- ** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1 files, 1 used, 102782 free (2 frags, 25695 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
Verified junos-vsrx-12.1X44-D10.4-domestic signed by PackageProduction_12_1_0
WATCHDOG_TIMER : Loss of soft watchdog
panic: Loss of soft watchdog
cpuid = 0
db_log_stack_trace_cmd(c0d02ea0,0,eeb57b58,eeb57b44,c05e5691) at db_log_stack_trace_cmd+0x36
panic(eeb57b58,eeb57b58,0,1,6) at panic+0x2dc
statclock(eeb57c90,c4897630,4,eeb57cd0,c0a9479f) at statclock+0x32d
lapic_handle_timer(eeb57c90) at lapic_handle_timer+0x9d
Xtimerint() at Xtimerint+0x2f
--- interrupt, eip = 0xc0a9c7d0, esp = 0xeeb57cd0, ebp = 0xeeb57cd0 ---
cpu_idle_default(eeb57d00,c05a3fd2,1,0,0) at cpu_idle_default+0x5
cpu_idle(1,0,0,c4897630,c05a3f23) at cpu_idle+0x29
idle_proc(0,eeb57d38,0,0,0) at idle_proc+0xaf
fork_exit(c05a3f23,0,eeb57d38) at fork_exit+0x85
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xeeb57d70, ebp = 0 ---
###Entering boot mastership relinquish phase
KDB: enter: panic
[thread pid 12 tid 100004 ]
Stopped at kdb_enter+0x162: movl $0xc0c77125,0(%esp)
db> start shell
No such command
db> ?????? F:\VMtest\SRX???\junos-vsrx-12.1X47-D2-domestic.ova??.
Bad character
?
db>
db>
- 引用 dollarmartin
- 我的SRX虚拟怎么进入db模式？为何没有启动完毕？请大拿指点～～非常感谢
- 引用 dollarmartin
- 坐等高手指导，为啥按照步骤操作而没法进入用户模式？？？？？？？？？？？？？？？？？？？？？？
- 引用 godder211
- ** /dev/ad0s1e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1 files, 1 used, 102782 free (2 frags, 25695 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
Verified junos-vsrx-12.1X44-D10.4-domestic signed by PackageProduction_12_1_0
WATCHDOG_TIMER : Loss of soft watchdog
panic: Loss of soft watchdog
cpuid = 0
db_log_stack_trace_cmd(c0d02ea0,0,e0291b58,e0291b44,c05e5691) at db_log_stack_trace_cmd+0x36
panic(e0291b58,e0291b58,0,1,6) at panic+0x2dc
statclock(e0291c90,c392e630,4,e0291cd0,c0a9479f) at statclock+0x32d
lapic_handle_timer(e0291c90) at lapic_handle_timer+0x9d
Xtimerint() at Xtimerint+0x2f
--- interrupt, eip = 0xc0a9c7d0, esp = 0xe0291cd0, ebp = 0xe0291cd0 ---
cpu_idle_default(e0291d00,c05a3fd2,1,0,0) at cpu_idle_default+0x5
cpu_idle(1,0,0,c392e630,c05a3f23) at cpu_idle+0x29
idle_proc(0,e0291d38,0,0,0) at idle_proc+0xaf
fork_exit(c05a3f23,0,e0291d38) at fork_exit+0x85
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xe0291d70, ebp = 0 ---
###Entering boot mastership relinquish phase
KDB: enter: panic
[thread pid 12 tid 100004 ]
Stopped at kdb_enter+0x162: movl $0xc0c77125,0(%esp)
db>
- 引用 wuxiaowuwu
- 谢谢了额！
- 引用 chengjiesys
- 我的和楼主的情况一模一样，请问楼主解决了吗，怎么解决的
- 引用 ilove17109
- Thanks for sharing.
- 引用 s23xiaojia
- 寻找新疆大侠唐再飞，呵呵